CGMINER 3.7.2 PASSWORD

Automatic selection of the indicator is standard. However, it has virtually no effect on performance.

worksize( -w) - the size of the memory is set. Here it is indicated as follows: -vectors By default, the indicator is selected automatically, but you can specify your own: 1, 2 or 4. vectors ( -v) - sets the width of vectors. temp-target - the desired temperature is set. It looks for example like this: -temp-overheat 95. This is where the coolers work faster (rpm increase). temp-overheat - temperature, specified in ℃, when dropping core frequencies. temp-hysteresis - the temperature difference in ℃ from the expected indicator is indicated. ndevs (-n`) - displays a list of graphics processors, number and outputs. It looks like this: -kernel diakgcn - help is needed in choosing kernels for GPUs. It can be diablo, poclbm, phatk, diakgcn. kernel ( -k) - specifying the kernel for the hardware. Setting the value “d” - indicates that the indicator is dynamic. The range of selectable indicators is from one to 14. The data is entered in this form: -gpu-vddc125. Gpu-vddc - change the voltage on the core. gpu-powertune - GPU powertune installation. gpu-memdiff - sets the specific difference between kernel and memory. In the case of bitcoin mining, we recommend lowering it, for litecoin - raising it. gpu-memlock - setting the memory frequency. For example, 1: 0.2: 1 shows OpenCl 1 over ADL 0.2 over 1. gpu-map - matches OpenCl with ADL hardware number manually or paired CSV. It looks like this: -gpu-fan 50 or 50-65. gpu-fan - setting the fan speed in percentage, a certain value or range. It looks like this: -gpu-engine 700 or 700-900.

It is permissible to enter both one indicator and a whole range. gpu-engine- setting the frequency indicator for the video adapter. gpu-dyinterval - setting the refresh period in milliseconds for video adapters using dynamic intensity. The value is placed next to the command -gpu-thread. gpu-threads ( -g) - setting the amount of threads on the graphics processor. disable-gpu (-G) - disabling graphics processors. The value of the card is placed next to it (for example, -device 1). By default, the program launches everything it detects. device (-d) – defines a specific video card. auto–gpu – sets the GPU frequency to maintain a certain temperature. auto-fan – adjusting the speed of the GPU cooler to maintain a certain temperature. To get a fine configuration, you need to use a number of special commands: Setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 cgminer -scrypt -I 10 -o stratum +tcp://:7915 -u my_worker_name.my_worker_password -p my_worker_password -T This completes the configuration of the bat file.

CGMINER 3.7.2 PASSWORD

-p x – enter the password that was used to create the worker.-u user – displaying the login that was used when registering on the pool, here enter the name of the worker, which was made there.You can find it in the “Getting Started” category. Take them in the pool where you are going to mine. -o – after it you need to specify the address of the pool with the port.-scrypt – an indication of the algorithm used to obtain the digital token that the miner should use.Cgminer –shows the file used to run the miner.bat file setting has the following data:Ĭgminer –scrypt –o stratum+tcp\:pool_address:port –u wallet.1 – p x Setting up is relatively easy once you know all the basic commands. 'user' : 'DKs5E8nWJe2E5vYnVSoYqNjw2T17nGYUDo.1',

Cgminer 3.7.2